)
4-Channel Motor Driver 16-Pin Plastic Dip Tube
Image is representative only
| Jameco Part no. 1341966 | |
|---|---|
| Manufacturer | TEXAS INSTRUMENTS |
| Manufacturer no. | L293DNE |
| RoHS compliant | |
| Catalog 132 , page 12 | |
- Data Sheet (current) [496 KB ]
QUADRUPLE HALF-H DRIVER
The L293D is a quadruple high-current half-H driver. The L293D is designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. This device is designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.
All inputs are TTL compatible. Each output is a complete totem-pole drive circuit, with a Darlington transistor sink and a pseudo-Darlington source. Drivers are enabled in pairs, with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. When an enable input is high, the associated drivers are enabled, and their outputs are active and in phase with their inputs. When the enable input is low, those drivers are disabled, and their outputs are off and in the high-impedance state. With the proper data inputs, each pair of drivers forms a full-H (or bridge) reversible drive suitable for solenoid or motor applications.
Features:
Report a problem
Suggest a product
| Specification | Value |
|---|---|
| Family | L293D |
| Maximum Operating Temperature | 70°C |
| Mounting | Through Hole |
| Packaging | Tube |
| Pin_Count | 16 |
| Supplier_Package | PDIP |
| Product Width | 6.35mm |
| Product Height | 4.57mm |
| Specification | Value |
|---|---|
| Product Length | 19.8mm |
| Product Type | Motion Motor Control |
| Type | 4-Channel Motor Driver |
| Maximum Operating Current | 24mA |
| Minimum Operating Supply Voltage | 4.5V |
| Maximum Operating Supply Voltage | 36V |
| Minimum Operating Temperature | 0°C |
Report a problem
Suggest a product
Shop by Brand
