This inexpensive etching solution allows you to etch copper-clad circuits without a heater. Great for students or hobbyists. The tank can accommodate two 8" x 9" double-sided copper-clad boards (CCBs).
Note: This kit requires one of the following copper etch solutions:
A minimum of 4 liters of Ferric Chloride. There should be enough ferric chloride to completely cover your board. Do not dilute ferric chloride with water. Recommend Jameco P/N: (616446, 1 Gallon) and/or P/N: (616438, 32 fl. oz.)