Go to main content

Jameco Electronics

Log in | Track Orders | Cart |

Customer Care  1-800-831-4242

You are here: Home >> Education & Hobby Kits >> Educational Kits >> Robotics

PWM Stepper Motor Driver Kit

CJKIT-20877: JAMECO KITPRO View Larger Image
Image is representative only
JAMECO KITPRO
Jameco Part no. 2183816
Manufacturer JAMECO KITPRO
Manufacturer no. CJKIT-20877
   NCNR (Non-Cancelable, Non Returnable)
web exclusive
Pricing & Availability

$44.95

# of Unit Price
1+ $44.95
  • Availability:Ship  2 Wks ARO 
+ Add to my favorites

 Add to cart

PWM Stepper Motor Driver Kit

Control a stepper motor using this circuit and a servo PWM signal from an R/C controller, arduino, or microcontroller. On-board circuitry limits winding current, allowing you to use any bipolar stepper motor and any supply voltage from 6-36V. The circuit will operate the stepper motor analogous to a standard or continuous rotation servo depending on the mode. Half and Full step modes are also supported.

Warning: Stepper Motor must not be driven in excess of 2A per winding. Input PWM signal must be 5V. If voltage input through servo PWM cable is greater than 5V, the red pin should not be connected to the board and 5V should be supplied through X1.

Check out what others are saying about the PWM Stepper Motor Driver project build!

Please note: Due to inventory packaging methods, you may receive extra components for some products. Some items may not be sold at Jameco and will need to be purchased separately, please review the materials list below.

You Will Need

  • 2 Power resistors: PWR163S-25-R500J (required)
  • ATTINY24A-PU (required)
  • Soldering Iron and older
  • Tweezers or hemostat or small pliers
  • Helping hand
  • Tape
  • Flat head screwdriver

Kit Includes:

Part No.
Qty.
Description
15747
10
Header, double row, 6-pin (2x3), 0.1"
34121
1
Heat sink mounting kit
36038
10
Diode, switch, 1N4148
36097
10
Diode, zener, 1N4733A
36265
10
Diode, sil rec, 1N5404
38607
10
IC socket, 20-pin
112432
10
Shorting blocks, red
129242
1
Heat sink, 1.2"L X 1"W X 0.5"H
149948
2
Switch, pushbutton, tactile, SPST
241146
2
Potentiometer, 10k ohm
245403
1
IC, L298N
288067
1
IC, L297/1
544905
10
Capacitor, ceramic, radial, 0.033µF
609545
10
Capacitor, radial, 0.1µF, 50V
189668
1
Connector, terminal block
117560
2
Header, 1 row, 4 pin
37162
10
IC socket, 14-pin
109576
1
Header, 1 row, 3 pin
330431
10
Capacitor, radial, 1µF, 25V
690742
50
Resistor, CF, 330 OHM
691180
50
resistor, CF, 22K OHM
2081932
10
LED, T1, orange red diffused
2144884
3
Header, 1 row, 2 pin
2157167
10
Resistor, CF, 10K OHM
---
1
PCB
---
1
INSTRUCTIONS


Club Jameco Project #20877

Check out more fun and exciting electronic projects

Report a problem
Suggest a product
No specifications are available at this time. Call for more information.

Report a problem
Suggest a product

Copyright ©2002 - 2014 Jameco. All Rights Reserved.