)
Search Results: 158 results found for “printed circuit board”
Sort by Results per page 1 2 3 4 5 >> Next
$5.95 each
PROTOTYPE BUILDER,1.6 INCH x2.7 INCH ,PCB MATERIAL:EPOXY GLASS,0.062 INCH THICK,0.1 INCH HOLE SPACING,0.08 INCH PAD SIZE
| Part no. 105100 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | G/S(PCB228)-R |
$5.95 each
PERFORATED BARE PHENOLIC PROTOTYPE BOARDS
| Part no. 616690 | |
|---|---|
| Manufacturer | GC ELECTRONICS |
| Manufacturer no. | 22-516 |
$2.95 each
CIRCUIT BOARD HARDWARE MOUNTING KIT
| Part no. 106551 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | 00106551 |
$8.95 each
PROTOBOARD, 2.5"x4.25", 640 HOLES, PLATED THRU-HOLE
| Part no. 263215 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | PCB-858-R |
$6.95 each
EXPERIMENTER?S PHENOLIC PROTOTYPE BOARD
| Part no. 616673 | |
|---|---|
| Manufacturer | GC ELECTRONICS |
| Manufacturer no. | 22-512 |
$8.95 each
PROTOBOARD,2-7/16X4-1/8,PLATED THRU,PAD/HOLE,640 HOLES
| Part no. 263207 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | PCB-463-R |
$6.95 each
PROTOTYPE BUILDER,1.5 INCH x3.5 INCH,PCB MATERIAL:EPOXY GLASS,0.062 INCH THICK,0.1 INCH HOLE SPACING,0.08 INCH PAD SIZE
| Part no. 105102 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | G/S(PCB-365)-R |
$9.95 each
PROTOTYPE BUILDER,4.3 INCH X6.8 INCH ,PCB,PRE-ETCHED,DRILLED,PCB MATERIAL:EPOXY GLASS,0.062 INCH THICK,0.1 INCH HOLE SPACING,0.08 INCH PAD SIZE
| Part no. 206587 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | PCB-586-R |
$8.95 each
PC BOARD FR2 PHENOLIC 4.5X6.5
| Part no. 43140 | |
|---|---|
| Manufacturer | VECTOR ELECTRONICS |
| Manufacturer no. | #64P44XXXP |
$8.49 each
PROTOTYPE BUILDER,2 INCH x4.4 INCH ,PCB MATERIAL:EPOXY GLASS,0.062 INCH THICK,0.1 INCH HOLE SPACING,0.08 INCH PAD SIZE
| Part no. 105129 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | 2853PCB-R |
$11.95 each
PROTOTYPE BUILDER,5.5 INCH X8.0 INCH ,PCB,PRE-ETCHED,DRILLED,PCB MATERIAL:EPOXY GLASS,0.062 INCH THICK,0.1 INCH HOLE SPACING,0.08 INCH PAD SIZE
| Part no. 206594 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | PCB-594 |
$9.95 each
PT Series Prototyping Board,
3 Power Buses, 3.5"L x 2.5"W
| Part no. 645677 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | PB-456 |
$16.95 each
PROTOBOARD (8001),PCB MATERIAL: EPOXY GLASS,THINKNESS 0.062 INCHES,0.01 INCH HOLE SPACING,PAD SIZE 0.08 INCHES.4.5 INCHES WIDE X 6.5 INCHES LONG
| Part no. 21435 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | JE401-R |
$9.95 each
PROTOTYPE BUILDER,3.1 INCH x5.5 INCH ,PCB MATERIAL:EPOXY GLASS,0.062 INCH THICK,0.1 INCH HOLE SPACING,0.08 INCH PAD SIZE
| Part no. 105153 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | 2851PCB-R |
$13.95 each
PROTOTYPE BUILDER,3.6 INCH x7 INCH ,PCB MATERIAL:EPOXY GLASS,0.062 INCH THICK,0.1 INCH HOLE SPACING,0.08 INCH PAD SIZE
| Part no. 105162 | |
|---|---|
| Manufacturer | JAMECO VALUEPRO |
| Manufacturer no. | 2852PCB-R |
