This vibration sensor is model LTD0 manufactured by Measurement Specialties. Whether used as a vibration sensor, a flexible switch, or a frequency response device, piezo film is an interesting sensor to interface with Parallax microcontrollers for example. It is easy to use with the COUNT or PULSIN commands on a BASIC Stamp.
Features
Wide range of applications
Thin polymer film laminate with 2 crimped contacts
Easy interface with the Basic Stamp, SX, or Javelin Microcontrollers
Specifications
Power Requirements: N/A
Communication: Analog (Up To about 70 VDC; Sensitivity 50 mV/g)
Dimensions: .98 x .52 in (25 x 13 mm)
Operating Temperature: +32 to +158°F (0 to +70°C)
Example Applications
Flexible Switch
Vibration Sensor
Alarm System Sensor
Product Damage/Shock Detector
Note: Output may need to be conditioned before connecting certain TTL devices. We recommend a Zener Diode (Jameco P/N: 179047).
