Type 4x Polycarbonate Watertight Enclosure with Clear Flat Lid Rounded Rectangle Light Gray 120x65x40mm
Ideally suited for mounting printed circuit boards or DIN rail mounted components
Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear lids carry a UL94V-0 rating.
Polycarbonate versions are cUL and UL 508A listed (File # E65324).
Enclosure color is a light gray (RAL 7035).
Gasketed lid with two piece "tongue & groove" construction provides protection against access of oil, dust and water.
Gasket is one piece made from high temperature, UL listed silicone.
Polycarb versions are designed to meet NEMA Type 4, 4X ratings which meet and exceed IP ratings up to and including IP68.
Lid is secured with included M4 stainless steel machine screws which are threaded into integral stainless steel bushings for repetitive assembly & disassembly. All hardware is stainless steel to avoid corrosion caused by dissimilar metals.
Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
Internal features are maximized for mounting options and vary with size:
Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting
Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in