MG Chemicals 415-1L

33 oz. Ferric Chloride Copper Etchant Solution

Ready to use solution designed for etching printed circuit boards and other metals.

Features:

Etch rate: 175-200 µinch/minute @ 122-131°F (50-55°C)

Maximum copper holding capacity: 100 grams/liter

Operating temperature condition: 122-131°F (50-55°C)

Specific gravity: 1.4

Appearance: Dark brown

Boiling point: 222.8°F (106°C)

Freezing point: 32°F (0°C)

Volume: 33 ounces (1 liter)

Note: Do not dilute this product with water

Instructions:

Immerse copper board in solution and agitate until etching action is completed. Ferric Chloride can etch up to a maximum of 100g of copper per liter of solution (.33 square meters or 3.5 square feet of 1 oz copper clad board).

Etching process can be sped up by heating the solution to a temperature no higher than 55°C (135°F).

24 Hour Emergency Contact Information:
   Chemtrec (U.S.): (800)424-9300
   Canutec (Can): (613)996-6666

Report a problem
Suggest a product