1000V 300MHz x100 CAT II Passive Oscilloscope Probe

You may also like:
5187-C-36 5187-C-36
Pomona Electronics
5187-K-36 5187-K-36
Pomona Electronics
T5300 T5300
EZ Digital
80K-40 80K-40
Fluke
6266 6266
Pomona Electronics
TL40 TL40
Fluke

This product has been discontinued and is not available for purchase. Please click on the button below for replacement and/or substitute products.


  • Jameco Part no.: 2116293
  • Manufacturer: Pomona Electronics
  • Manufacturer no.: 6498
  • NCNR (Non-Cancelable, Non Returnable)
  • HTS code: 8544420000
  • Web Exclusive

1000V 300MHz x100 CAT II Passive Oscilloscope Probe

Features

  • This probe is recommended for probing applications in service and development environments and is adjustable for low and high frequencies
  • The DC fine adjustment enables trimming for preferred voltage ranges
  • The probe's entire core is made of a high quality ceramic hybrid
  • Pure coaxial design and laser trimmed resistors ensure highest signal fidelity along the signal path offering high bandwidth and fast rise times for accurate impulse measurements
  • Our passive probes are spring loaded, with needle sharp tips to support precise and safe measurements
  • Probe tips are interchangeable and can be replaced easily
  • Attenuation ratio: 100:1
  • Scope Bandwidth: 500 MHz
  • System Bandwidth (-3dB): 300 MHz
  • Probe Input Capacitance: < 7.5 pF
  • Compensation Range: 10 - 50 pF
  • Probe Input Resistance: 50 MΩ
  • Cable Length: 6.6 ft. (2 m)

Accessories included with Probe:
  • Ground Lead with Alligator Clip 22 cm (8.66")
  • Insulating Cap
  • Protection Cap
  • Solid Tip 0.8mm (0.0315")
  • Spring Tip 0.8mm (0.0315")
  • Sprung Hook
  • Trimmer Tool


Report a problem
Suggest a product
Specification Value
Bandwidth500 MHz
Resistance50M Ohm
Capacitance7.5 pF(100X)
Length78 in.
Voltage Rating1000 V
Attenuation Ratio100:1


Report a problem
Suggest a product