Easy PIR Alarm Kit Solder-Assembly Customizable Project

Easy PIR Alarm Kit

Protect yourself and your property with the Jameco Electronics Easy PIR Alarm Kit! It runs on a 9V battery - or you can add your own wall transformer to save batteries or for use in permanent installations. The kit is fully customizable. For example, an extra set of relay contacts are also available to connect to external circuits or alarm systems. One can find dozens of uses like: midnight refrigerator alarm, animal or human monitoring, trespass sensor, blind-side alarm, customer entrance chime - anytime one needs low sound level alarm notification.

Soldering assembly is required.

Features

• Passive Infrared (PIR) Sensor Alarm- Perfect for Simple Detection without Loud Alarm
• Self-Contained - No Externals Needed
• Resets Automatically
• Easy to Build "dead bug" Design
• Customizable
• Runs on 9V Battery
• Dozens of Possible Uses
• Detection Range: 0 to approx. 25 feet
• Optional: Extra NO/NC Contacts Output

Required Tools and Parts

The kit includes all the parts needed except hook up wire. To assemble it, you will also need:

• Soldering Iron and solder
• A knife is helpful for dressing out the holes
• A drill and bits to drill out holes
• Small Philips screwdriver for the project box screws
• Wire cutter/stripper
• Insulated wire, solid or stranded 22-24 awg
• Hot glue gun
• Dremel tool
• Small diameter heat shrink tubing (for 22-24 awg wire)

Report a problem
Suggest a product