Siglent Technologies SSA3021X

Spectrum Analyzer 9 kHz to 2.1 GHz FFT

Note: Tracking Generator (TG) is now included at No Charge.

Features

• All-Digital IF Technology
• Frequency Range from 9 kHz up to 2.1 GHz
• Display average noise level (DANL): -161 dBm/Hz (Normalized to 1 Hz (typ.))
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
• Phase Noise: Total Amplitude Accuracy ±0.7 dB
• 1 Hz Minimum Resolution Bandwidth (RBW); 1 Hz to 1 MHz, in 1-3-10 sequence
• Standard Preamplifier
• 10.1" WVGA (1024x600) Display
• Sweep mode: FFT; RBW-1 Hz to 10 hKz
• Sweep time: 1 ms to 3000 s
• Tracking Generator: All SSAs have the tracking generator hardware installed for easy component/filter testing

Feature Options*

• EMI Receiver Measurement (option: SSA3000X-EMI):
  • Resolution bandwidth (6 dB): 200 Hz, 9 kHz, 120 kHz
  • Detector: Quasi-peak(following CISPR 16-1-1)
  • Dwell time: 0 us to 10 s
  • PC Application Software: EasySpectrum EMI pre-compliance test Software
• Reflection Measurement (option: SSA3000X-REFL):
  • Function: VSWR, Return loss, Reflect coefficient
• Advanced Measurement (option: SSA3000X-AMK):
  • Function: Channel power, Adjacent channel power ratio, Time domain power, Occupied bandwidth, Third-order intercept, Spectrum monitor

*Trial Statement: New SSA3000X instruments feature approximately 40 hours of free trials of these options. The trial timer is running when the instrument is powered on. After the trial has expired, the function will be disabled/greyed out.

Downloads & Resources

• SSA-RMK Installation Instructions (offsite)
• UKitSSA3X (offsite)
• SSA3000X Service Manual (offsite)
• Reflection Bridge Instructions (offsite)
• SIGLENT Probe Datasheet
  
  Report a problem
  Suggest a product