The TopMax-III is a high-speed universal device programmer for USB 1.1/2.0/3.0 PC-interface. It can program a 64Mbit (AM29LV641) flash memory in 42 seconds. This is a true low-cost production-oriented system. The TopMax-III meets the demands of today's programming solution for lab and production on line applications. TopMax-III is a software driven device programmer that supports a wide variety of programmable devices including: EPROM, EEPROM, Serial PROM, EPLD, PEEL, GAL, FPGA, and single chip Microcontroller. The great advantage of this programmer is its programming speed and superior software. It's controlled via a host IBM PC or compatible computer, and the operating software has a user-friendly interface that includes window pull-down menus and virtual memory management to deal with very large files.
Hardware Features
One on-board FPGAs for extremely fast communication.
Extremely fast SPI, QPI Serial memory support
Supports real low-voltage such as 5, 3.3, 2.7, 1.8 volts for programming power
Detects all pin locations for poor or damaged pin contacts
External START Key allows production programming mode
Internal universal power supply, 110-240 VAC (no separate power supply required in foreign country)
Current limiting protects hardware circuit from improperly inserted or defective chips and operation errors
Standard 48-pin ZIF (Zero Insertion Force) socket accepts both 300mil and 600 mil DIP devices
True universal pin driver hardware
Hardware diagnostic program exams all socket-pin drivers before using programmer
5.5"(L) x 8.14"(W) x 1.63"(H); (140mm(L) x 207mm(W) x 41.45mm(H)
Operation Voltage : 90 to 264VAC @ 47 to 63Hz (Power Consumption : 100W)
CE compliant
Software Features
Auto Search Device Select function supports E(E)PROMs & Microcontrollers
Device Insertion Test identifies improperly inserted device before programming
Gang Program Mode allows programming up to 8 sockets concurrently
(START ALL Key enables to program the programmers simultaneously)
Checks for incorrect device insertion, backward, incorrect position, and poor pin contact.
Device Operations: Read, Blank check, Program, Verify, Checksum, Data compare, Security, Auto (blank check program- verify)
Option Bit program
Displays programming parameters and optional bit information on the screen
Sets device/buffer address ranges before programming devices
User-changeable programming parameters
Built-in editor for both buffer date and test vectors
Supports Binary and all hex files (POF and JEDEC, Intel Hex, Motorola S Records, Tekhex, straight hex, hex-space,
Extended Tekhex, and others, automatic file type recognition) with Load, Edit, and Save commands
