Hammond Manufacturing 1554E2GY Electronic Enclosures

Type 4x Polycarbonate Watertight Enclosure with Gray Flat Lid Rounded Rectangle Light Gray 90x90x60mm

Features

• Ideally suited for mounting printed circuit boards or DIN rail mounted components
• Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating
• Polycarbonate versions are cUL and UL 508A listed (File # E65324).
• Enclosure color is a light gray (RAL 7035).
• Gasketed lid with two piece "tongue & groove" construction provides protection against access of oil, dust and water.
• Gasket is one piece made from high temperature, UL listed silicone.
• Polycarb versions are designed to meet NEMA Type 4, 4X ratings which meet and exceed IP ratings up to and including IP68.
• Lid is secured with included M4 stainless steel machine screws which are threaded into integral stainless steel bushings for repetitive assembly & disassembly. All hardware is stainless steel to avoid corrosion caused by dissimilar metals.
• Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
• Internal features are maximized for mounting options and vary with size:
  • Internal DIN rail mounting tabs molded into most models
  • Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in
  • Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in
• Size: 3.5"L x 3.5"W x 2.4"D