Snap-In Panel Mount Cable - USB-A Socket to 2 Wires
This panel mount cable is great for making USB power connections with a panel-mount setup. On the rectangular panel-mount side you get a USB Type A connector; the other end has power and ground ines. We particularly like that the panel mount part is very small and snaps in and you get a wire pigtail cable on the other end for quick integration.
What's special about this, you ask? It's a Snap-In Panel Mount Cable - much easier than a classic panel mount cable; you don't need screws or drills for installation. Cut out a rectangular hole about 2cm by 1cm, up to 4mm thick, and then snap the panel in; it will fit snugly and cover up any burrs, so your cut doesn't have to be so precise. Perfect for adding a USB A charging/power port to your project enclosure!
Red cable is 5V; black wire is ground. No data lines are included on this one - it's going to just provide 5V power to some client device.
